MT series is a professional SATA HDD duplicator, specially designed for high volume duplication. U-Reach adopted a unique multitasking technology that can simultaneously copy 25 HDD targets with a high transfer speed of 18GB per minute.
We guarantee the highest productivity without speed degradation, even as the number of targets increase. The MT series SATA HDD duplicator provides four copy modes: quick smart copy, all partitions copy, percentage copy and whole HDD copy that all meet different duplication task requirements. The quick copy mode copies data and skips blank area. NTFS, Linux (Ext2/Ext3/Ext4), FAT (16/32/64), and Mac (HFS, HFS+, HFSX) formats are all supported with quick copy mode.
In addition, the MT series SATA HDD duplicator is equipped with different levels of secure erase functions, Quick Erase, Full Erase, DoD 5220 Erase government standards and Secure Erase, which can fulfill different levels of HDD wiping security.
Impeccable High Speed
U-Reach SATA HDD duplicator is capable of copying at 18 GB/min. on all HDDs simultaneously, without any speed degradation as number of targets increase. This duplicator is great for manufacturers.
Simplifying operation and user friendly, operating on 4 buttons of duplicator would complete all the jobs.
• Supports GPT, MBR table format.
• Supports Advanced format HDD.
• Support OS: Linux, Unix, Windows, Macintosh, etc.
Support a variety of interfaces
Supports IDE, eSATA, mSATA, Micro SATA, M.2 (NGFF), and CFast Card.(Requires adaptors)
Systems & Data Copy
This mode identifies HDD Windows (FAT16/32/64, NTFS), Linux(ext2/ext3/ext4), Mac(HFS, HFS+, HFSX) formats. It will only copy the data and system contained area, which enhances the copying efficiency.
Real-Time PC Monitoring
Flawlessly MONITORS work progress during operation. It displays all information, such as writing speed, operation time, percentage of completion, etc. for EVERY PORT, which is a powerful tool for sorting out the HDD writing lag and ensuring the operational efficiency. All the information you need will appear on the PC screen.
1. Duplication status is monitored from PC while connected to it.
2. "iSecuLog" shows and records the brand name, model, S/N, duplication time, result of every HDD from all the
ports and the info of both source HDD and target HDD.
3. Slow R/W speed HDD detection: lagging HDD can be easily sorted because user can see the duplication
speed of every port in "Event Log".
4. Select dates to export part of the data log. Just one click will export the data into a .txt file and save on PC.
The date of export is the file name. (e.g. 20130308.txt)
Log Report Management
Records operation time, each port’s process details, including HDD’s model, capacity, S/N, result (pass, fail).Real-time recording and viewing Log Report via PC-Link.
|Speed||18GB/min. (300MB/sec.) *Actual performance is dependent on HDD transfer rates.|
Up to 512MB
All Partitions/Whole HDD/Percentage: copies all types of formats, both known and unknown.
Quick Copy: copies FAT16/32/64, Windows (NTFS), Mac (HFS/HFS+/HFSX), and Linux (Ext2/3/4).
Stand-alone, non PC-based operation
Backlit Monochrome LCD Display
3 LED Indicators per Port:
Yellow (Power), Green (Pass), Red (Fail)
4 Push Buttons (▲, ▼, OK, ESC)
Quick Copy, All Partitions Copy, Whole HDD Copy, and Percentage Copy
Manually set (Bad sector) threshold range to skip during copy process
Bit-for-bit data comparison
Quick Erase, Full Erase, DoD Erase, and Secure Erase
Real-time status monitoring through PC
Monitor real-time recordings and Log Reports via PC-Link
Event log reports are generated through the USB port and saved to USB devices
All (Windows, Linux, and other stand-alone systems)
1.8"/2.5"/3.5” SATA HDDs and SSDs
IDE, microSATA, mSATA and M.2
Supports MBR, GPT, and Advanced formats.
Selectable Voltage 115V or 230V, 50/60Hz
Operating Temperatures: 5°C ~ 45°C (41°F ~ 113°F)
Storage Temperatures: -20°C ~ 85°C (-4°F ~ 185°F)
Working Humidity: 20% ~ 80%
Storage Humidity: 5% ~ 95%
FCC, CE, RoHS