1 to 23 SATA (9GB/min) HDD/SSD Duplicator and Sanitizer (MT2400G)
Feature
U-Reach MT-G series is a professional SATA HDD/SSD duplicator, specially designed for high volume duplication. U-Reach adopted a unique multitasking technology that can simultaneously copy 23 HDD targets with a high transfer speed of 9GB per minute.
We guarantee the highest productivity without speed degradation, even as the number of targets increase. The MT series SATA HDD duplicator provides four copy modes: quick smart copy, all partitions copy, percentage copy and whole HDD copy that all meet different duplication task requirements. The quick copy mode copies data and skips blank area. NTFS, Linux (Ext2/Ext3/Ext4), FAT (16/32/64), and Mac (HFS, HFS+, HFSX) formats are all supported with quick copy mode.
In addition, the MT series SATA HDD/SSD duplicator is equipped with different levels of secure erase functions, Quick Erase, Full Erase, DoD 5220 Erase government standards and Secure Erase, which can fulfill different levels of HDD wiping security.
Impeccable High Speed
U-Reach MT Series SATA HDD/SSD duplicator is capable of copying at 9GB/min. on all targets simultaneously, without any speed degradation as number of targets increase. This duplicator is great for manufacturers.
Intelligent Duplication Modes
U-Reach MT-G HDD duplicator offers a diverse of duplication modes. The user may select the appropriate mode based on application demand.
Illustration of Copy Modes
The areas containing data are marked in blue. The areas being copied are marked in red. Duplication time depends on the speed supported by the hard drive's controller chip.
Sanitization Methods
High Compatibility
Auto Rejection of Slow Devices
MT Series HDD/SSD duplicator enable end-users to set the minimum writing speed threshold. This feature was developed to prevent and to eliminate problematic devices that halts the duplication and sanitizing process.
Double Data Verification: Compare + CRC Checksum
U-Reach duplicators makes straightforward copies, but it is imperative that the copied data are verified through a bit-by-bit process, this will ensure successful copied and reduce customer recalls.
Skipping Bad Sectors
End-users are given options to skip bad sectors from the source device. Access the function to select the numbers of bad sectors to skip, from 0 through unlimited.
Optional Adapters Supported
Model | MT600G | MT800G | MT1600G | MT2400G |
Targets | 1-5 | 1-7 | 1-15 | 1-23 |
Speed | 9GB/min. (150MB/sec.) *Actual performance is dependent on HDD transfer rates. |
Specifications |
Buffers |
Up to 512MB |
|
Supported Formats |
All Partitions/Whole HDD/Percentage: |
||
Quick Copy: |
|||
Operating Type |
Stand-alone, non PC-based operation |
||
Language Support |
English, Japanese |
||
LCD Display |
Backlit Monochrome LCD Display |
||
LEDs |
3 LED Indicators per Port: Yellow (Power), Green (Pass), Red (Fail) |
||
Control Panel |
4 Push Buttons (▲, ▼, OK, ESC) |
||
Features |
Copy Modes |
Quick Copy, All Partitions Copy, Whole HDD Copy, and Percentage Copy |
|
Skip Bad-Sectors |
Manually set (Bad sector) threshold range to skip during copy process |
||
Compare Function |
Bit-for-bit data comparison |
||
Sanitization Modes |
Quick Erase, Full Erase, DoD Erase, and Secure Erase |
||
Special Features |
PC Monitoring |
Real-time status monitoring through PC |
|
Log Report Management |
Monitor real-time recordings and Log Reports via PC-Link |
||
Event log reports are generated through the USB port and saved to USB devices |
|||
Compatibilities |
OS Supported |
All (Windows, Linux, and other stand-alone systems) |
|
Compatible Interfaces |
w/o Adapters |
1.8"/2.5"/3.5” SATA HDDs and SSDs |
|
w/ Adapters |
IDE, microSATA, mSATA and M.2 |
||
Advanced Formats |
Supports MBR, GPT, and Advanced formats. |
||
Hardware Specifications |
Power Supply |
Selectable Voltage 115V or 230V, 50/60Hz |
|
Temperature Range |
Operating Temperatures: 5°C ~ 45°C (41°F ~ 113°F) Storage Temperatures: -20°C ~ 85°C (-4°F ~ 185°F) |
||
Humidity Range |
Working Humidity: 20% ~ 80% Storage Humidity: 5% ~ 95% |
||
Certification |
FCC, CE, RoHS |
Event Log Report
U-Reach HDD/SSD duplicators has an unique mechanism to prevent alteration of its Event Log Report. It records the operation results and other information of each devices completely. It is an important asset for production management and analysis.
Flash Duplicator
USB Drive Duplicator
SD/microSD Card Duplicator
CF/CFast Card Duplicator
SATA DOM/eMMC DuplicatorHDD/SSD Duplicator
SATA/SSD HDD Duplicator
SAS HDD Duplicator
CRU HDD Duplicator
Mini Duplicator
M.2 NVMe PCIe SSD DuplicatorAccessoriesSupport
Firmware
Warranty
FAQSolution
Write Protect Solution Flash Duplicator
Flash Card Mass Duplicaton
Flash Quality Checking Tools
HDD Data Secure Sanitizer
iSecuLog Tamper-free Log Report
Various Interface HDD DuplicatorShow RoomNewsAbout U-Reach
Branches Worldwide
R&D Innovations
Corporate Milestones
ISO CertificationContact U-Reach
Copyright © 2021 U-Reach Inc. All rights reserved
PRODUCTS
SUPPORT
SOLUTION
Write Protect Solution Flash Duplicator
iSecuLog Tamper-free Log Report