U-Reach PE Series is a professional PCIe NVMe M.2 duplicator, specially designed for high volume duplication. U-Reach adopted a unique multitasking technology that can simultaneously copy PCIe M.2 devices with a high transfer speed of 24 GB per minute.
Impeccable High Speed
U-Reach PE Series PCIe SSD duplicator is capable of copying at 24GB/min. on all HDDs simultaneously, without any speed degradation as number of targets increase. This duplicator is great for manufacturers.
No waiting time required for duplication
When each round of duplication is completed, the next round can start immediately without having to wait or restart the machine
Native Support NVMe and SATA Protocols
Converter chips are not being adopted by PCIe series which deploys an M.2 interface with native NVMe/SATA protocols. This directly transfer the data to enhance the compatibility during the duplications.
Industrial-grade FPGA design not only facilitates cross interface / cross-protocol duplication but avoids restarting the system after each round of duplication.
Note: When doing cross-protocol duplication, it is recommended to use a data disk. If you are copying OS system, it is recommended to use the same protocol device to ensure the device can boot into the operating system properly.
Intelligent Duplication Modes
U-Reach PCIe SSD duplicator offers a diverse of duplication modes. The user may select the appropriate mode based on application demand.
Illustration of Copy Modes
The areas containing data are marked in blue. The areas being copied are marked in red. Duplication time depends on the speed supported by the hard drive's controller chip.
Source Management System
The administrator can through a specific software store the image files on the computer for centralized management. When needed, this image files will be sent to the duplicator for duplication. This is designed specifically for production plant as this makes it easier to mange the source and reduce human error.
Cross Interface Duplication
PE Series with the corresponding module, it can duplicate target with different interface.
Event Log Report
U-Reach PCIe SSD(M.2) duplicators has an unique mechanism to prevent alteration of its Event Log Report. It records the operation results and other information of each devices completely. It is an important asset for production management and analysis.
USB Drive Duplicator
SD/microSD Card Duplicator
CF/CFast Card Duplicator
SATA DOM/eMMC DuplicatorHDD/SSD Duplicator
SATA/SSD HDD Duplicator
SAS HDD Duplicator
CRU HDD Duplicator
M.2 NVMe PCIe SSD DuplicatorAccessoriesSupport
Write Protect Solution Flash Duplicator
Flash Card Mass Duplicaton
Flash Quality Checking Tools
HDD Data Secure Sanitizer
iSecuLog Tamper-free Log Report
Various Interface HDD DuplicatorNewsAbout U-Reach
ISO CertificationContact U-Reach
Copyright © 2021 U-Reach Inc. All rights reserved