Super One Series - 1 to 11 HDD/SSD Duplicator and Sanitizer (HD-SU11)
Super One office series is a professional SATA Hard Disk Drive duplicator, specially designed for easy office duplication. U-Reach adopted a unique multitasking technology that can simultaneously copy HDD targets with a high transfer speed of 9GB per minute.
We guarantee highest productivity without speed degradation even as the number targets increases. The Super One series SATA Hard Drive duplicator provides four copy modes: quick copy, all partitions copy, percentage copy and whole HDD copy that all meet different duplication task requirements. The quick copy mode copies data and skips blank area. NTFS, Linux (Ext2/Ext3/Ext4), FAT (16/32/64), and Mac (HFS, HFS+, HFSX) format are all supported with quick copy mode.
In addition, the Super One series SATA Hard Drive duplicator is equipped with different levels of secure erase functions, Quick Erase, Full Erase, DoD 5220 Erase government standards and Secure Erase which can fulfill different levels of security for hard drive wiping.
9GB/min. (150MB/sec.) *Actual performance is dependent on HDD transfer speeds.
All Partitions/Whole HDD Copy/Percentage Copy : All Formats
Quick Copy: FAT16/32/64, NTFS, Linux (Ext2/3/4), HFS/HFS+/HFSX
Backlight monochrome LCD Display
Yellow (power),Green (pass), Red (fail)
Control Panel Button
4 Push Buttons(▲, ▼, OK, ESC)
Quick Copy, All Partitions Copy, Whole HDD Copy, and Percentage Copy
Manually set threshold to skip bad sectors during copying process
Bit-by-bit data comparison
Quick Erase, Full Erase and DoD Erase
All (Windows, Linux, and other stand-alone systems)
3.5” SATA HDD
Supports MBR, GPT, and Advanced formats.
· Embedded controller is designed to support capacities over 18TB+.
· Constant improvement supports latest market-available devices.
Adjustable Voltage 115V-230V, 50/60Hz
Working: 5°C ~ 45°C; Storage: -20°C ~ 85°C
Working Humidity: 20% ~ 80%; Storage Humidity: 5% ~ 95%
FCC, CE, RoHS
Impeccable High Speed
U-Reach Super One Series Hard Drive duplicator is capable of copying at 9GB/min. on all targets simultaneously, without any speed degradation as number of targets increase. This duplicator is great for manufacturers.
Intelligent Duplication Modes
U-Reach Super One Series Hard Drive duplicator offers a diverse of duplication modes. The user may select the appropriate mode based on application demand.
Illustration of Copy Modes
The areas containing data are marked in blue. The areas being copied are marked in red. Duplication time depends on the speed supported by the hard drive's controller chip.
Erase HDD index table, and only takes A FEW SECONDS to complete.
Erases the entire HDD.
Complies with U.S. Department of Defense erasure standards.
A National Institute of Standards and Technology 800-88 accepted
technique for properly purging hard drives. This method is supported by almost all modern SATA/SAS HDD.
Double Data Verification: Compare + CRC Checksum
U-Reach duplicators makes straightforward copies, but it is imperative that the copied data are verified through a bit-by-bit process, this will ensure successful copied and reduce customer recalls.
Skipping Bad Sectors
End-users are given options to skip bad sectors from the source device. Access the function to select the numbers of bad sectors to skip, from 0 through unlimited.
Supports 2.5” HDD/SSD, and M.2 (NGFF).
(requires 2.5" to 3.5" HDD Caddy ).
USB Drive Duplicator
SD/microSD Card Duplicator
CF/CFast Card Duplicator
SATA DOM/eMMC DuplicatorHDD/SSD Duplicator
SATA/SSD HDD Duplicator
SAS HDD Duplicator
CRU HDD Duplicator
M.2 NVMe PCIe SSD DuplicatorDisc DuplicatorAccessoriesSupport
Write Protect Solution Flash Duplicator
Flash Card Mass Duplicaton
Flash Quality Checking Tools
HDD Data Secure Sanitizer
iSecuLog Tamper-free Log Report
Various Interface HDD DuplicatorNewsAbout U-Reach
ISO CertificationContact U-Reach
Copyright © 2021 U-Reach Inc. All rights reserved